Step 1 of 5
Connect your board
Power on your Beaver Board — the OLED will show a PIN code. Click Connect in the toolbar, choose Connect via Bluetooth, and select your board. If it's your first time, enter the PIN shown on the screen.
Write your very first block program and make the RED LED blink on and off. Experiment with timing to change the blink speed, then loop it forever.
Step 1 of 5
Power on your Beaver Board — the OLED will show a PIN code. Click Connect in the toolbar, choose Connect via Bluetooth, and select your board. If it's your first time, enter the PIN shown on the screen.