Step 1 of 5
Connect your board
Power on your Beaver Board — the OLED will show a PIN code. Click Connect in the toolbar, choose Connect via Bluetooth, and select your board. If it's your first time, enter the PIN shown on the screen.
Go beyond on and off — use PWM to set any brightness level from 0 to 100 % on the Beaver Board's three LEDs. Create a smooth fade-in and fade-out effect.
Step 1 of 5
Power on your Beaver Board — the OLED will show a PIN code. Click Connect in the toolbar, choose Connect via Bluetooth, and select your board. If it's your first time, enter the PIN shown on the screen.