Step 1 of 5
Connect your board
Power on your Beaver Board — the OLED will show a PIN code. Click Connect in the toolbar, choose Connect via Bluetooth, and select your board. If it's your first time, enter the PIN shown on the screen.
Teach your board to choose between two actions. Use an if/else block to check whether Switch A is pressed and light a different LED for each answer.
Step 1 of 5
Power on your Beaver Board — the OLED will show a PIN code. Click Connect in the toolbar, choose Connect via Bluetooth, and select your board. If it's your first time, enter the PIN shown on the screen.